1. Networking Basics
What is CCNA?
What is Network
OSI & TCPIP Model
Local Area Network (LAN)
Wide Area Network (WAN)
Ethernet
Ethernet Frame
MAC & IP Address
Unicast, Multicast, and Broadcast Addresses
Network Devices
Network Hubs Overview
Network Bridge Overview
Network Switch Overview
Network Router Overview
Half Duplex and Full Duplex
IEEE Ethenet standards
Encapsulation
Cisco Three-Layer Hierarchical Model
2. Cabling
Types of Ethernet Cabling
Straight-Through and Crossover
3. IP Addressing
Types of IP addresses
Classes of IP addresses
Private IP addresses explained
Subnetting explained
Subnet mask
Create subnets
CIDR (Classless inter-domain routing)
4. Network Tools
Ping explained
Traceroute explained
5. Network Protocols
TCP/IP suite of protocols
TCP explained
UDP explained
Ports explained
ARP (Address Resolution Protocol) explained
DHCP&DNSs
Telnet&SSH
FTP&TFTP
SNMP (Simple Network Management Protocol)
HTTP and HTTPS explained
6. Cisco IOS
Cisco 1OS overview
Power on a Cisco device
OS command modes
Get help in Ios
Running & startup configuration
OS basic commands
show command
Configure descriptions
Run privileged commands within global config mode
Ports on an lOS device
7. IP routing
What is IP routing?
Connected, static & dynamic routes
Administrative distance & metric
Routing protocols
8. RIP
RIP loop prevention
Advertise default routes using RIP
9. EIGRP
EIGRP overview
EIGRP configuration
Wildcard mask in EIGRP
EIGRP automatic & manual summarization
EIGRP authentication & load balancing
EIGRP Reliable Transport Protocol (RTP)
EIGRP Diffusing Update Algorithm (DUAL)
EIGRP summary
10. OSPF
OSPF overview
OSPF configuration
Designated & Backup Designated Router
OSPF authentication
OSPF summarization
OSPF summary
Differences between OSPF and EIGRP
Comparing internal routing protocols (IGPs)
11. LAN switching
Layer 2 switching
How switches work
Collision & broadcast domain
CSMA/CD
12. VLAN
What is a VLAN?
Access and trunk ports
Configuring VLANs
Configuring access & trunk ports
Frame tagging
IEEE 802.1Q
Inter-Switch Link (ISL)
Configuring voice VLANs
Configuring allowed VLANs
13. VTP
What is VTP?
VTP modes
VTP configuration
14. STP and RSTP
What is STP?
How STP works
Electing the Root Switch in STP
Selecting STP root port
Selecting STP designated port (DP)
What is RSTP?
How RSTP works
Configuring RSTP
15. ACLs
What are ACLs?
Types of ACLs
Configuring standard ACLs
Configuring extended ACLs
Configuring named ACLs
16. NAT
What is NAT?
Static NAT
Dynamic NAT
Port Address Translation (PAT) configuration
17. IPv6
What is IPv6?
IPv6 address format
Types of IPv6 addresses
IPv6 unicast addresses
IPv6 global unicast addresses
IPv6 unique local addresses
IPv6 link-local addresses
IPv6 multicast addresses
IPv6 address prefixes
IPv6 interface identifier
18. Miscellaneous
Wildcard masks
Setting up Telnet
Setting up SSH
Port security
Types of memory on a Cisco device
Configure Cisco router as DHCP server
Configure NTP on a Cisco router
Cisco Discovery Protocol (CDP) overview
Map hostnames to IP addresses
Configure Cisco device as DNS client
Chat on WhatsApp